[FIXED] Selected boot image did not authenticate Error

There is a high chance that your computer is not able to load the configuration that your BIOS has been set if the ‘fix selected boot image did not authenticate’ error is causing issues for you. There is a problem with the boot system security when this error has been presented.

There is an order of the booting codes which has been saved in the database and if there is a violation of a rule which must be followed while booting, the security is unable to let you access the system. The data that is required to boot into the computer might be corrupted or damaged as well.

If you accept and click the ok button, your computer will be stuck in a bootloop because this error will surely pop up again. There might be something majorly wrong with the system that you are using so you need to surely look into this problem as soon as possible. We have compiled all the fixes from all the legit sources so that you can fix this problem.

We have simplified all the steps so that you can just read the steps and copy paste several commands in order to fix this problem without any hassle. Different computers use different configurations so we are here to provide you with multiple solutions because there is no global fix for all configurations. The core problem as well as the circumstances might differ according to the machine.

There have been instances where the users have cause irreversible damage to their systems. The damage is caused by the misconfiguration of certain files which are important to the operating system. Make sure you create a system restore point so that your system will be recoverable and you can go all out on all the fixes which are mentioned below.

READ  Fixed: BAD_SYSTEM_CONFIG_INFO Error

Fix Selected boot image did not authenticate Error

Fix 1: Change the boot mode using the BIOS settings

selected boot image did not authenticate

  • Open up the BIOS settings by rebooting your computer and using the key assigned by the vendor (F10, Del). You can google the term ‘how to boot into the BIOS’ and you will be able to find the right key for your device.
  • After you have entered the BIOS setup, open the settings related to the System Configuration and search for the Legacy Boot option.
  • Disable the Secure Boot option and apply all the changes.
  • After you exit BIOS, boot up your computer and see if this fixes the problems

If this fix does not help you solve the Selected boot image did not authenticate error then make sure that you follow the next fix in order to fix all the core problems in your computer.

Fix 2: Reset your BIOS

  • Remove the battery from the device which you are using. You can remove the CMOS battery from the motherboard in case you are using a desktop.
  • Press the Power button and hold it for 30 seconds straight.
  • This will reset everything including the BIOS.
  • Reconnect everything and boot into your computer.
  • This should fix the Selected boot image did not authenticate error.

If this fix does not help you solve the ‘fix selected boot image did not authenticate’ error then make sure that you follow the next fix in order to fix all the core problems in your computer.

Fix 3: Reset BIOS settings to Default

  • Switch your computer off and turn it back on. Press the BIOS key while the booting process is on to enter the configuration.
  • Open all the type of menus and reset all the menus to the Default settings one by one.
  • The options may be termed as Reset to Default, Load Factory Settings, Clear BIOS Settings, Load Setup Defaults or something similar in meaning.
  • Make sure all the settings have been applied and then exit your BIOS. All the settings will no be switched to the optimal factory ones.
  • Reboot your computer and see if the issue has been resolved.
READ  USB Ports Not Working in Windows 10 [SOLVED]

If this fix does not help you solve the Selected boot image did not authenticate error then make sure that you follow the next fix in order to fix all the core problems in your computer.

Fix 4: Run Repair Utility

  • Use the drive with the bootable files of the Windows 10 OS and restart your computer
  • Select the language which you prefer and click the Next button. Use the Repair option and click on the option to Troubleshoot your problems.
  • Click on Advanced and launch the Startup Repair. Follow on screen instructions.

This should fix all the problems related to Selected boot image did not authenticate error.

Conclusion:

We have created the best guide which you can use to solve the ‘fix selected boot image did not authenticate’ issue. Make sure you follow each and every step under all the fixes and we assure you that the problem will go away in no time. We hope this guide helps you. Good luck.

 

Rate this post

Leave a Comment